OnSolar.co.uk 12 volt dc 20w low energy saving cfl lighting and bulbs

12v DC Compact Fluorescent lamps High Quality CFL and CC CCFL Cold Cathode Light Bulbs

	- 12v 20W CFL Compact Fluorescent Lamps for camping, off grid, remote and solar applications
	Specialist Supplier of 12v DC Compact Flourescent Lamps

Advert:

Lamps: 12V 20W CFL LAMPS

CFL: 12V DC 20W Compact Fluorescent Lamps

20 Watt 12V Compact Fluorescent Lamp

12V DC 20W CFL in B22 & E27 fitting options

20W 12V DC CFL - E27 and B22 base

A modern 'A rated' compact fluorescent lamp ideal for a huge range of applications where a good level of light is required with low energy consumption. The 20W CFL provides a more powerful light source, near equivalent to a regular 100W domestic incandescent lamp.

	Next Working Day delivery available
ONE Lamp	1 X B22 Bayonet Cap --->
£7.49	1 X E27 Edison Screw --->

TWO lamps	2 X B22 Bayonet Cap --->
£13.98	2 X E27 Edison Screw --->

FIVE Lamps	5 X B22 Bayonet Cap --->
£34.30	5 X E27 Edison Screw --->

RoHS Compliant 12V 20W Lamps

20W A rated 12v low energy lamps only at www.onsolar.co.uk

Click here to see 11 Watt 12V Compact fluorecsent lamps

20W CFL lamp details and specifications

A powerful 20 WATT Compact Fluorescent lamp suitable for many lighting applications using a 12v DC power supply. Ideal for areas requiring power efficient lighting such as: Remote Workshops, Marine and ‘off grid’ Solar powered homes, Caravans and remote locations such as Farm buildings, Barns and Stables and portable camping lamps. Lamps are available in ‘ES’ Edison Screw & ‘B22’ Bayonet cap base fitting.

Lamp specifications:

12V DC 20W Compact Fluorescent Lamp
Energy rating: 'A'
3 U / Element Tube
Colour temperature: 4200°K (degrees Kelvin) Bright White
Average Lumens: 1080
Average Lamp life:10,000 hours
Operating temperature: -10°C to +50°C
Pre-heat circuit fitted for long life
Lamp has built in Polarity Protection
Base fitting: B22 Bayonet Cap or ES-E27 Edison Screw
IC control circuit: Sine Wave
Dimensions:150mm X 50mm (max)
Operating Voltage: 11 – 15V DC (12V DC Nom)
Approximate equivalent light output (compared to regular incandescent lamps): 100W

SAFETY 1ST... Please ensure the correct rating of cabling is used throughout when installing DC lighting and other circuits. Very long cable runs may require high grade, high amperage cables in order to prevent excessive voltage loss, especially when using multiple lamps on the same cable run.
All circuits should be fitted with a suitably rated safety fuse in order to prevent fire in the event of short circuit.
Use of proprietary lamp fittings is recommended wherever possible to protect and prevent the ingress of flying insects, spiders and damp where lamps may be exposed in external / exterior light fittings.
Note: 12v ‘AC’ transformers must not be used. If using a DC regulated transformer, please ensure that it has enough power reserve for your application.
For any remote application, we recommend the use of Lead Acid or other quality rechargeable batteries and / or using a solar ‘PV’ panel & regulator to replenish power as necessary.

Fitting notes:

1) Using BC / B22 light fittings - If lamp does not illuminate, lamp may need removing, turning 180 degrees and re-fitting as they are polarity sensitive. See image ----->

2) ES / E27 - Centre contact is + positive

N.B: All lamps are reverse polarity protected so that there will be no damage if polarity is incorect for your light fitting (if lamp does not illuminate remove and refit B22 or change over supply cables on E27 fittings

What would you use your 12V CFL lamps for...

11W 12V CFL

Is it possible to generate free power - yes, it is! Click here

P&P Charges:

UK Delivery 2-5 days £2.35

UK 'Next Working Day' £4.60

Delivery within 'EU' £6.00*

Delivery to USA, Australia, etc, £10.00*

* NOTE: Packages over 1 kilo packed weight will be subject to a special shipping quotation - if this applies, we will contact you. Please ensure you have supplied a valid email address with your order.

Read our TERMS