A super powerful 10
WATT LED Floodlight suitable for many lighting
applications using a 12V DC power supply.
The lamp is fully outdoor rated with IP65
protection. Ideal for areas requiring energy
efficient 12 volt lighting such as: Workshops
garden lighting projects and ‘off grid’
Solar powered homes, for courtyards or parking
areas. Many remote locations such as Farm
out-buildings, Barns and Stables will find
these a very economical choice. Lamp uses
under 1 amp with example 12.8V DC.
Supplied with fitted 2 meter cable.
Lamp specifications:
Operating voltage:
11 – 28V DC max (12V / 24V DC Nom) control
unit automatically selects.
Wattage: 10W (Current draw
typically around 900ma / 0.9amps at 12v DC
[approximately half this value at 24V DC -
450ma])
Energy efficiency rating:
'A'
Type: High Grade LED, Low
Energy Floodlight
Colour temperature: 4200°K
(degrees Kelvin). Medium White
Average Lumens: 800. Near
equivalent light output as a guide (compared
to a regular halogen floodlight): 100W
Average Lamp life: 30,000
hours+
Weather Protection: IP65
Operating temperature: -40°C
~ +55°C
Connectivity:: Unit has built
in Polarity Protection
Fitting: Supplied complete
with pre-drilled adjustable bracket mounting.
IC control circuit: Automatically
adjusts to supply voltage of 12 or 24V DC
Dimensions: L115mm
X W87mm X D92 mm (+/- 2mm) ex mounting bracket.
Lamp Body: Quality die-cast
aluminium housing incorporating heat sink
fins to assist efficient cooling of electronics.
Unit Weight: 520g (.52 kilo)
ex cable.
Beam Angle / Dispersion:
120°
SAFETY 1ST...
Please ensure the correct rating of cabling
is used throughout when installing DC circuits.
Long cable runs may require high grade, high
amperage cables in order to prevent excessive
voltage loss, especially when using multiple
lamps on the same circuit.
All circuits should be fitted with a suitably
rated safety fuse in order to prevent fire
in the event of short circuit or malfunction.
Note:
12v ‘AC’ transformers or any kind
of adaptor/ transformer which does not produce
pure DC power must not be used. If using a
DC regulated transformer, please ensure that
it has enough power reserve for your application.
For any remote application, we recommend the
use of Lead Acid or other quality rechargeable
batteries and / or using a solar ‘PV’
panel & regulator to replenish power as
necessary.